thewoodworker

Hitachi c10rj vs dewalt dwe7491rs — Which One Should You Buy?

Without any further ado, let’s go straight to the points and comparison of both these table saw.

Hitachi C10RJ

The Hitachi C10RJ is a high-quality jobsite table saw that will satisfy the needs of almost any professional woodworker and enthusiast. Its construction is simple, but also durable and reliable. In addition, the new and improved motor is here to ensure smooth and safe cutting.

Table

The Hitachi C10RJ features an extendable 28.75 x 22-inch tabletop that can withstand even the largest of lumber pieces. Moreover, it has a rip capacity of 35 inches, which makes it one of the best in the industry. This feature is possible thanks to Hitachi’s rotating fence mechanism that’s connected to a classic rack-and-pinion system. You can find a similar system on the DeWalt DWE7491RS, but the Hitachi has a higher rip capacity.

The tabletop stands on a robust removable cart with wheels and extendable legs. The wheels make transporting the saw effortless, which is incredible considering its weight (96lbs). However, if you don’t intend on moving the Hitachi around, you’d be better off bolting it to your workbench.

Blade and Cutting Power

For this model, Hitachi decided to upgrade the motor. The C10RJ features a 15A motor, which produces up to 1.75HP of power. The motor (without load) spins at a maximum of 4500RPM, which should be enough to handle even the most resilient pieces of wood.

In addition to the new motor, the C10RJ also comes with a 10” 40-tooth carbide blade. Because of that, you can cut as deep as 3.125” at a 90° angle, and 2.25” at 45°. However, with C10RJ, you can do much more than just rip lumber. For instance, you can also cut hardwood boards with a surprisingly clean finish.

Safety and Additional Features

You’ll be relieved to hear that Hitachi went all out when it comes to C10RJ’s safety features. First of all, this model has an oversized power-off switch perfectly placed at knee level. So, in case you need to stop the blade quickly, you can do it safely without using your hands.

In addition, it has an electric brake which can stop the blade within seconds, ensuring maximum speed. And if the power goes out, the Hitachi automatically shuts down and stays off even after the power has returned. Furthermore, it has a built-in overvoltage and overcurrent protection.

When you order the Hitachi C10RJ, you also get a set of safety equipment such as a blade guard assembly, anti-kickback pawl assembly, etc. In addition to providing you with these tools, Hitachi has also made some storage room for them on the saw itself, so you’ll never misplace your equipment again.

DeWalt DWE7491RS

The DeWalt DWE7491RS looks and feels incredibly similar to the Hitachi C10RJ. However, DeWalt’s signature black-and-yellow color scheme makes the DWE7491RS stand out. Although the DeWalt has a smaller footprint than the Hitachi, you shouldn’t let its size fool you.

Table

As I previously mentioned, DeWalt’s top is a few inches smaller than Hitachi’s. Its exact size is 26”x22”, which is still more than enough for most applications. Also, it has the same rack-and-pinion system as Hitachi, but its rip capacity is lower. While the Hitachi can rip wood up to 35” in diameter, the DeWalt can only cut 32.5”.

On the other hand, the fence on the DeWalt seems to be more robust than it is on the Hitachi. Its weight seems to support that claim, being that it weighs more than 110lbs. Thankfully, the DeWalt’s stand also includes wheels for relatively easy transport.

Blade and Cutting Power

Even though its current draw and power are the same as Hitachi’s, the DeWalt can only spin up to 4200RPM. Still, that doesn’t mean that its motor isn’t powerful. It’s strong enough to ensure smooth cutting, that’s for sure.

The DeWalt’s 10” carbide blade is nearly identical to Hitachi’s. The cut depth is also the same — 3.125” at a 90° angle, and 2.25” at a 45° angle.

Safety and Additional Features

As far as operator safety is concerned, the DeWalt has an on/off switch placed at knee level, just like the Hitachi. However, the DWE7491RS has an interesting additional feature. It has two dust collection ports — a large 2.5” port just below the blade, and a 1.25” port at the top of the blade guard. You can easily vacuum up any excess dust with these dual dust ports.

Conclusion

Honestly, whichever of the two table saws you pick, you’ll most likely be perfectly satisfied. They’re both durable, reliable, and full of features. However, the Hitachi C10RJ takes the win thanks to a few of its advantages.

For starters, it’s way cheaper than the DeWalt, which is its greatest advantage. These two products are not that different, but you will pay about 25% less if you opt for the Hitachi C10RJ. In addition to its price, the Hitachi has a higher rip capacity, as well as a higher max RPM. Besides that, it’s much lighter and thus much easier to transport.

DeWalt DW734 vs. DW735 vs. DW735X — What’s the Best Planer for You?

By thewoodworker Leave a Comment

Every contractor, carpenter, and fan of DIY projects knows the importance of a high-grade wood planer. After all, it heavily influences the quality of the end product. With the right planer, you will achieve smooth, even cuts and a brilliant finish.

Of course, your choice of a planer depends on your needs and the project you’re working on. Still, whatever your requirements may be, one of the DeWalt planers will surely work out for you. But which model should you pick?

DeWalt’s offer includes three planer models: DW734, DW735, and DW735X. Each has its own pros and cons so it’s up to you to decide which one will be perfect for your projects. Let’s take a look at their features and differences.

1. Benchtop Planer DW734

While Benchtop Planer DW734 offers only the basic features, it still remains a powerful tool. Because of its thickness adjustment features, you can use it to process different kinds of wood. It handles pieces up to 6 inches thick and 12.5 inches wide.

This model includes a three knife cutter that can make 96 cuts per inch and spin at 10,000 RPM. What’s more, the knives are easily replaceable, so you won’t waste your time on sharpening old ones. They are 12 inches long, which is longer than what other similar products offer.

DW734 also includes a dust hood, which you can connect to a dust collector or a vacuum cleaner. In addition, this planer includes a four-column carriage lock, which will significantly reduce the movement caused by snipe. However, unlike other DeWalt models, DW734 has only one speed option.

If you’re looking for a quality and easily-portable tool, DW734 will be the perfect model for you. At only 80 pounds, it’s much lighter than other DeWalt wood planers. Also, you can fold the feed table up so it won’t take much space when you’re not using the tool.

2. DeWalt Planer DW735

While DeWalt Planer DW735 is a bit bulky, it comes with better equipment and more features than DW734. The greatest thing about this planer model is that it comes with a strong, 15A motor and two speed options. Besides the 10,000 RPM spin and 96 cuts per inch — the option it shares with DW734 — with this model, you can also make 179 cuts per inch.

In addition, DW735 has an automatic carriage lock, a feature that DW734 is missing. Thus, movement control while using this tool is far easier. The thickness capacity remains at 6 inches, but it can handle 13 inches wide materials, which is a significant improvement.

Another great thing about DW735 is that it has amazing debris management features. Its clip ejection system makes clogging highly unlikely. Also, it can serve as a sort of a vacuum, thus making it easier for you to keep the surface clean. Finally, the tool comes with two dust shrouds that make the cleanup faster and simpler.

DW735 has an aluminum base, which further improves its strength and durability. Yet, this feature makes it 12 pounds heavier than DW734. Since it weighs 92 lbs, this model won’t suit your needs if you’re looking for an easily portable tool.

3. DEWALT Thickness Planer DW735X

DEWALT Thickness Planer DW735X is similar to its predecessor, DW735, in several ways, but it also includes some extra accessories.

DW735X has an outstanding 15A motor with a speed of 20,000 RPM . In addition, the cutter head speed reaches 10,00 rpm. Just like DW735, this model has two speed options — 96 and 179 cuts per inch.

This model includes a three knife cutter head that increases the longevity of the knives by 30%. The blades are 13 inches long, reversible and disposable. Therefore, you don’t need to bother yourself with sharpening them, which will save both your money and effort. What’s more, this model comes with an additional set of cutter head knives, so you will be stocked for a long while.

DW735X makes cuts easily both on softwood and hardwood. Even if you’re dealing with the hardest materials, the motor will not strain and you will not damage the wood. Thus, your hard work will not result in snipes and tear out.

This model also has a 19-3/4″ cast aluminum base, which makes it more stable and twice more rigid than folding tables and regular 10-inch bases. Unlike DW735, this model offers both infeed and outfeed tables.

Finally, DW735X comes with a dust adapter and its chip ejection system includes a fan. So, you won’t need to worry about spending hours on cleanup after your work.

The only area where this model falls short is its weight. Because of its 92 pounds, it belongs in the category of stationary tools. So, if you’re looking for a portable tool, DW735X probably won’t work for you.

What Is the Best DeWalt Planer Model for You?

As you can see, all three DeWalt models are quite outstanding. Therefore, your choice depends on your own preferences and needs.

Our favorite pick is without any doubt DW735X. In terms of its performance, it is far superior to other models. Also, with this model, you won’t need to acquire infeed and outfeed tables separately. With a strong motor and two speed options, this is one of the best tools available. Its only weakness is that the motor is quite loud. So, if you’re looking for a premium-quality tool that would bring you fantastic results, this will be the best pick for you.

Moreover, if you need a reliable and extra-durable tool, DW735 and DW735X are both fantastic options. Since they include an aluminum base, these models are sturdier than other planers.

However, both DW735 and DW735X are quite pricey. Therefore, if you want to get the job done and save some money, DW734 will be the better option. Finally, portability can be an important feature when choosing a wood planer. So, if you don’t mind the lack of portability, you can go for either DW735 or DW735X. On the other hand, if you need a tool that you can move easily, DW734 will be the best model for you.

Whichever model you decide to go for, we are sure that you will be satisfied with it. After all, DeWalt offers only the best products to their customers.

Dremel 3000 vs 4000 vs 4200 vs 4300 Rotary Tool Kit Showdown — Which One Should You Get?

By thewoodworker Leave a Comment

Whether you need to do some cutting, polishing, or engraving, a rotary tool is your best choice. That being said, Dremel is one of the most popular rotary tool manufacturers in the US. They make all kinds of attachments and accessories. And in this sea of Dremel products, it’s hard to decide which one you should buy.

In order to help you choose, I’m going to present four different rotary tools kits from Dremel and compare them.

Dremel 3000

The Dremel 3000 is the least expensive product on this list, but don’t let that fool you. Although it does have fewer accessories, it’s not that different from the other models. It’s a great tool kit for beginners who want to start DIY-ing at home.

You can use this tool for all types of applications — from sanding and polishing to cutting and engraving. And much like all the other models on the list, it’s compatible with all Dremel attachments.

Design

It’s apparent that Dremel paid attention to ergonomics when designing the 3000. The main rotary tool is symmetrical and sleek. Moreover, its shape ensures a tight and comfortable handgrip, almost like a pencil.

Aside from all that, the EZ Twist nose cap and wrench allow you to switch accessories quickly and efficiently.

Speed

Unfortunately, Dremel 3000 is powered by a 1.2-amp motor, which is not that impressive in comparison to 1.6 amps that other tools on this list have. Still, the Dremel 3000 can easily go from 5000 to 32000 RPM, which is quite impressive. Because of that, you have full precision control of your tool and you can adjust the speed however you want.

Dremel 4000

Dremel 4000 is a new and improved version of the 3000. It has more features and accessories, and it has a faster motor. And obviously, all that reflects on its price. However, if you don’t need as many as 50 accessories, you can get this tool for a lot cheaper.

The 4000 can also be used for thousands of applications, from sanding to cutting and engraving. All in all, it’s just full of innovations. Aside from the new motor, which I’ll get to in a bit, Dremel introduced a new airflow system with the 4000. This mechanism should prevent overheating and keep things running smoothly.

Design

The Dremel 4000 features a smaller, more subtle design when compared to the 3000. The 4000 is mostly marketed towards DIY users.

However, this new design is a part of the enhanced cooling system, which keeps this small device cool during high power loads. In addition to the airflow system, the improved design also gives you a better grip on the device. That’s great because you do need a good grip to keep the device in control at full RPM.

Speed

Speaking of RPM, that’s exactly where the greatest feature of the Dremel 4000 lies. The 4000 has a high-performance motor which can spin at up to a remarkable 35000 RPM. That’s 25% stronger than the motor on the 3000. Such speeds allow for incredibly smooth cutting. However, be careful — it takes a lot of strength and skill to keep a Dremel in control at 35.000 RPM.

Dremel 4200

Dremel 4200 is the most expensive product on this list. However, you should keep in mind that it is a full-size rotary tool, after all. It’s marketed towards construction and metallurgy professionals. The 4200 is bigger than the other Dremel models, which also means that it has a bigger cooling surface area. In addition, both the motor and cooling system use ball bearings to ensure smooth operation and no friction heat buildup. As far as accessories are concerned, the 4200 has got plenty of those, too.

Design

Aside from having that standard ergonomic design that ensures a tight grip, the 4200 also has the EZ Change Mechanism, which allows for quick tip replacement without any tools needed. Don’t get me wrong, the EZ Twist nose cap worked fine, but it did require some effort. With this new mechanism, now it’s as easy as pulling a lever.

Speed

The Dremel 4200 features the same motor as the 4000, and it’s more than capable of cutting through the hardest of steel. Of course, you should always use appropriate tips when working with hard steel. But with 4200’s motor, cutting steel has never been easier.

To help you through high workloads that require constant power, Dremel 4200 has an integrated Electronic Feedback System. This system enables sustained and constant speed during high power work, such as working with hardened steel.

Dremel 4300

The 4300 is one of the best rotary tool models that Dremel currently has to offer. If you’re looking for a reliable and incredibly precise tool, look no further. Although its cost certainly matches its quality, those who make a living using these types of tools won’t mind investing in such a powerful machine.

Design

At first glance, it’s clear that Dremel put in effort when designing the 4300. The brand new three-jaw chuck tip replacement system makes tip replacement just as easy as it was with the lever, but with a much greater capability of sustaining high workloads. In addition to the three-jaw chuck, the 4300 also has a handy little Pivot Light.

Speed

The 4300 has the same high-performance motor as the 4200, but it has a much better cooling system. This new and improved cooling solution ensures cool handling under incredibly high workloads.

Conclusion

To sum up, if you’re an aspiring DIY enthusiast who wants to do crafts, your best choice is the Dremel 3000. It will do just fine for most applications. Also, it won’t cost you an arm and a leg.

However, if you’re a professional and you require a larger, sturdier tool for more intensive workloads, you should go with the 4200. Even though it’s quite a markup from the 3000, it’s totally worth the investment. So, if you have a few bucks to spare, you should definitely consider getting the 4200.

Dewalt dws709 vs dw716 vs dws779 vs dws780 – Compound Miter Saw Showdown

By thewoodworker Leave a Comment

When you need to make angled cuts, a compound miter saw is your best option. In most cases, it’s used to cut fence posts, door frames, picture frames, and similar items. However, there are many different types of miter saws. DeWalt alone has four models. Although they seem similar, they’re actually quite different in almost every aspect — pricing, weight, material, etc.

In the following text, I’ll present and compare four different miter saws offered by DeWalt.

1. DeWalt WS709

The DeWalt WS709 is a feature-packed sliding compound miter saw. Thanks to its sliding system, it can handle wide boards with ease. Additionally, this model can achieve multi-angle cutting, which allows you to cut the tough crown molding pieces.

Construction

The WS709 has a lightweight, yet sturdy frame. Its motor is mounted above the back of the blade, which allows for excellent vertical cutting. You can cut up to 2×14” of lumber at a 90° angle, and up to 2×10” of lumber at 45°. Also, it sits on steel rails that contain linear ball bearings to ensure cutting precision.

Blade and Cutting Power

The WS709 comes with a 15A high-power electric motor, which goes up to 3800RPM. You can cut hardwood using the WS709 and easily maintain a clean cut. The blade itself can tilt 49° to either left or right. Thanks to this feature, you can make bevel cuts without having to flip the board between cuts, saving you both time and effort. In addition, the miter detent plate has 13 positions, which ensures optimal accuracy.

Safety and Additional Features

The WS709 comes with an included dust bag, blade wrench, and material clamp. Even though the sliding mechanism is secure, you have to use a knob to lock the miter. Unfortunately, a lever would have been a better choice here. Also, this model doesn’t come with a laser guide.

2. DeWalt DW716

The DeWalt DW716 is a compact compound miter saw with double-bevel capabilities. Even though it lacks the sliding ability of the other models, it works great for smaller boards and more precise cutting.

Construction

DW716 is a sturdy, high-quality machine. It’s surprisingly small and lightweight for its power. But despite its size, the DW716 has excellent cross-cutting abilities. It can cut through an 8” board in a single pass. Unfortunately, you can only cut 2×10” of lumber at 90°, and up to 2×8” of lumber at 45°. Still, thanks to its double-bevel ability, you can tilt it at 0°, 33.9°, 45°, and 48° on either side. And being that it weighs only 44 lbs, it’s easy to transport.

Blade and Cutting Power

The DW716 features the same 15A motor and 12” blade as all the other saws on this list. However, its RPM limit is at 3600, which is lower than its counterparts. On the other hand, it has a miter detent override that allows you to adjust the miter stops however you want. This feature might turn out to be extremely valuable when it comes to custom woodworking.

Safety and Additional Features

As far as safety is concerned, this model comes with only a dust bag. However, it does feature a locking lever, as well as a carry handle for optimal portability.

3. DeWalt DWS779

The DeWalt DWS779 is the second most popular product in the company’s miter saw line, right after the DWS780. However, most people don’t need the advanced features of the DWS780, so they opt for DWS779, as it’s also much cheaper.

Construction

The DWS779 features the same design as the previous models. However, it does look bulkier, and it has a few additional features. The DWS779 is large, but that allows it to cut 2×16” of lumber at 90°, and up to 2×12” of lumber at 45°. Additionally, it can support up to 7.5” of nested crown molding.

Blade and Cutting Power

One of the biggest differences between the DWS779 and DWS780 is the blade material. The DWS779 comes with a stainless steel 12” blade, which should work fine for most applications. However, it does not leave as smooth a finish as the carbide blade used for DWS780.

Safety and Additional Features

The DWS779 comes with significant feature upgrades. For starters, it comes with a new dust vacuum system, guaranteed to eliminate at least 75% of the residue. Additionally, you can enjoy the benefits of an integrated laser guidance system, which makes precise cutting easier than ever.

4. DeWalt DWS780

The DeWalt DWS780 is by far the most popular model in the DeWalt miter saw range. Even though its price is somewhat outrageous, you can rest assured that no corners were cut in the making of this model.

Construction

The DWS780 has a similar construction to DWS779’s. However, while the DW779 features a laser guidance system, the DW780 has a brand new XPS alignment system, which we’ll get to in a bit.

Blade and Cutting Power

The DeWalt DWS780 comes with a standard 15A 3800RPM motor which is connected to a carbide steel blade. Unlike the stainless steel blade used on the DWS779, a carbide steel blade leaves a smooth finish, topped with sharp edges.

Safety and Additional Features

In addition to the new dust vacuum system we’ve already seen on the DWS779, the DWS780 also has an XPS crosscut alignment system. This new system uses an extremely strong LED to cast a shadow of the blade on your wood, ensuring precise cuts every time. In contrast to the laser system on the DWS779, you don’t have to realign the setup each time you change the blade.

Conclusion

So, which DeWalt saw should you buy? Well, it depends on your workplace needs. If you need a basic miter saw for DIY projects, you should go with the DWS709. It has more features than you’ll ever need, but it is reasonably priced.

However, if you’re a professional and you need a serious tool for your business, I recommend the DWS779. It has awesome features, but it doesn’t cost as much as the DWS780.

Dewalt dwe7480 vs dw745 vs 7490 vs 7491rs – Which Table Saw Should You Choose?

By thewoodworker Leave a Comment

Whether you are a carpenter or a contractor, buying a high-quality table saw is among the most important investments you can make. If you’re looking for a new table saw, you’ve probably considered going for a DeWalt product. After all, the company has been dominating the saw market for years.

DeWalt makes various types of table saws and at first, they will probably all look the same to you. The only difference is the price, right? Actually, while you can use all these table saws for the same purpose, they are all unique in terms of accessories and features.

To help you make the best choice, we have decided to compare four models of DeWalt table saws: DWE7480, DW745, 7490X, and 7491rs. Once you learn all about their pros and cons, you will be able to decide which of these table saws suits your needs the best.

1. DEWALT DWE7480 Table Saw

If you’re looking for a small, compact table saw, DEWALT DWE7480 is a fantastic option for you. This 10-inch saw is incredibly light, as it weighs only 54.4 pounds. Thus, it is both extremely portable and won’t take much space when you’re not using it.

But don’t let its dimensions fool you. Although one of the smallest table saws, DWE7480 is known for its outstanding performance. It contains a strong motor — with 4800 RPM— and can cut through softwood and hardwood alike. At 24 inches, the rip capacity is also significant, so you can use it to cut through shelving materials and large trims.

The blade is made of carbide and contains 24 teeth. Moreover, you can adjust the level from 0 to 45 degrees. Also, the rack and pinion systems make the adjustments of fence rails smooth and fast.

DWE7480 has a metal roll cage base, which provides outstanding durability. In addition, this table saw contains a dust collection system and table coating to prevent friction.

2. DEWALT DW745 Table Saw

DEWALT DW745 happens to be the most popular and the most affordable DeWalt table saw. It’s tiny and DWE7480 is the only table saw lighter than this one. Therefore, it’s perfect for handymen on the move and people who are looking for great portability.

The blade diameter is 10 inches and this little machine has a strong, 15A motor. Also, the speed is 5,000 RPM, which is an upgrade from DWE7480’s 4800 RPM. In addition, this table saw includes telescopic fence railings and modular guarding system. Also, you can adjust rear feet according to your needs.

DW745 has a steel roll cage as a base, which significantly improves its durability. It won’t get damaged even if you drop it on the floor.

Unfortunately, this table saw doesn’t come with a stand, so you will need to buy it separately.

3. DEWALT DWE7490X Table Saw

DEWALT DWE7490X happens to be one of the more expensive models. Still, this table saw comes with a scissor-type stand, which most users find quite helpful. Since the stand is easily foldable and the saw weighs only 58 pounds, it is easily portable.

In addition, this model includes an exclusive telescoping fence. Therefore, it has a fantastic ripping capacity, especially in comparison to DW745 and DWE7480. Also, it features an improved airflow. Just like with other DeWalt models, the motor is 15A. Thus, it is strong enough to cut through pressure-treated lumber and hardwoods.

Another great thing about DWE7490X is that it is compatible with dado blades. However, the blade’s width must be 13/16″ or less, and you will need to buy a separate throat plate.

What’s more, this model comes with rack and pinion fence systems that will ensure all your adjustments run accurately and smoothly. Its site-pro modular guarding system is yet another amazing feature. With each application, it will allow for various adjustments of guarding components.

While many may find that the price is too high, we believe that this table saw provides good enough value for money.

4. DEWALT DWE7491RS Table Saw

Finally, we have DEWALT DWE7491RS — a premium-quality table saw and our favorite pick. This table saw has a 15A, motor which gives it enough power to cut through even the hardest types of wood.

In addition, the ripping capacity is outstanding — 32-1/2 inches. Thus, DWE7491RS is far superior to other DeWalt table saw models. Because of the increase in capacity, this model can easily cut through various trim materials and larger shelving.

What’s more, DWE7491RS includes a quick-release mechanism. So, you can easily release the blade guard and the riving knife. This feature certainly makes the whole process much faster and smoother.

With this table saw, you can make 2-1/4 inches deep cuts at 45 degrees and 3-1/8 inches deep cuts at 90 degrees. Also, the saw includes a dust collector that you can connect to a vacuum. So, you won’t need to waste much time on cleaning up after you’re done.

Finally, DWE7491RS offers the best stand in the whole DeWalt offer. The stand is quite solid and reliable. Also, it is easily foldable and includes wheels. Therefore, even though this table saw has larger dimensions and weighs 90 pounds, it is still quite portable.

What Is The Best DeWalt Table Saw for You?

Each of these DeWalt table saw models has its advantages and disadvantages. Still, they are all high-quality and durable, so it all comes down to what kind of product you need.

In our opinion, the best pick is DWE7491RS. It has large table dimensions, an amazing roller stand, and can cut through various types of wood. However, it is a bit bulky and more expensive than some other models.

On the other hand, if you’re looking for a lightweight, portable table saw, DWE7480 and DW745 will probably work for you. Even though they are small, they have strong motors and decent rip capacity.

Still, whichever DeWalt table saw you go for, we’re sure you won’t regret it.